Adjust the automatic inspection standard (automatic inspection level).
Category | Adjustment / Maintenance | |||
Location | Machine | Touch Panel | ||
Printer driver | - | |||
Application | - | |||
Required options | All the following optional devices are required. Intelligent Quality Optimizer IQ-501 Auto Inspection Unit UK-301 Relay Unit RU-702 Video Interface Kit VI-514 Video Interface Kit VI-515 | |||
Required items | - | |||
Setting items | Inspection level selection key | [Essential] | Sets the inspection level when [Essential] is selected. | |
[Standard] | Sets the inspection level when [Standard] is selected. | |||
[Premium] | Sets the inspection level when [Premium] is selected. | |||
[Detection Level Adj. for Thin Paper] | [ON] | Adjusts the inspection level at use of thin paper. | ||
[OFF] | Does not adjust the inspection level at use of thin paper. | |||
[Cancel] | Moves to the previous screen without saving the settings. | |||
[OK] | Saves the settings and moves to the previous screen. | |||
[Previous] | Moves to the previous page. | |||
[Next] | Moves to the next page. | |||
[Reset] | Resets the numeric value you are currently entering. | |||
Keypad | Used to enter the compensation value. | |||
Remarks | The streak stain and spot inspection functions are optional. These functions are not displayed by default. To use this setting, please contact your service representative. | |||
Reference | - | |||
Screen access | Control panel - Utility/Counter - [User Setting] - [Common Setting] - [Automatic Inspection Level Setting] | |||
Control panel - Utility/Counter - [Administrator Setting] - [Common Setting] - [Automatic Inspection Level Setting] |
This section describes an example case in which the [Detection Level] of [Stain] is selected.