Adjust the pitch of the alignment plate for folding on the saddle stitcher to reduce misalignment and distortion in the paper stack during folding.
Make this adjustment when misalignment occurs on the paper stack for [Fold&Staple], [Multi Half], or [Multi 3-Fold].
Category | Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | Saddle Stitcher SD-513 | ||
Required items | - | ||
Setting items | [Offset for All Size] | Adjusts the alignment pitch common to all sizes. | |
Paper size selection key | Selects the paper size to adjust. | ||
[+] / [,] | Switches the paper size page. | ||
Keypad | Used to enter numeric values. | ||
[Clear] | Returns the entered numeric value to "0". | ||
[Set] | Sets the numeric value entered using the keypad to the selected setting item. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Fold Paper Width Adj.] | ||
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Fold Paper Width Adj.] |
A sample is output.
a: If the setting value of the paper width is wider than the actual paper width, misalignment in the paper stack becomes uneven.
b: If the setting value of the paper width is narrower than the actual paper width, misalignment in the paper stack is in one direction (distortion).
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-50~+50 1step = 0.1mm]