Adjust the amount of paper loop for pre-registered rollers of [Tray1] to [Tray9] and [Bypass].
Adjust if there is a paper jam in the register part or if paper curls or wrinkles has occurred.
The adjustment is possible in the wider range than [Pre-registration Adj.].
Category | Adjustment / Maintenance | ||
Location | Machine | Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | This function requires one of the following optional devices. Paper Feeder Unit PF-712 Paper Feeder Unit PF-713 Paper Feeder Unit PF-812 Multi Bypass Tray MB-511 | ||
Required items | - | ||
Setting items | Paper tray selection key | Select the adjustment target. | |
[Thin] | Select the paper type to adjust. | ||
[Normal] | |||
[Thick] | |||
[Envelope] | |||
[+] / [,] | Switches the adjustment target page. | ||
Keypad | Used to enter numeric values. | ||
[+ / -] | Sets the plus or minus of the numeric value. | ||
[Clear] | Returns the entered numeric value to "0". | ||
[Set] | Sets the numeric value entered using the on-screen keypad or the Keypad of the Control panel to [Current Data]. | ||
[Print Mode] | Outputs a chart for measurement. For details, refer to [COPY] Screen. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Printer Adjustment] - [PFU Registration Adj.] |
For details about the "" mark that is printed on the front side of the chart, refer to About Charts.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:0~+200 1step = 0.1mm]