User's Guide

> Print Workflow > Automatically Outputting Paper When Problems Occur > Implementing Automatic Inspections > Selecting Pre-Created Reference Images and Performing Automatic Inspections

Selecting Pre-Created Reference Images and Performing Automatic Inspections

Overview
Procedure

Overview

When using reference images that have already been created to perform automatic inspections, select the image from the list and print the job.

Tips
  • Textured paper, unprinted insertion paper, paper with punch holes, tab paper, and insertion paper are not subject to automatic inspections.
  • You can perform inspections when using paper with the numbering and page numbers already printed on it, or when using the stamp copying function for the date and time, by specifying the areas not targeted for inspection. For details, refer to Automatic Inspection Area.

Procedure

The following is an example of the procedure how to configure settings using the system's Touch panel.
Mount Image Controller IC-610 and any required options for automatic inspection onto the system. For details, refer to What Is Automatic Inspection?.
1
Press [MACHINE] and then [CNTL] on the system’s Touch panel to display the [Hold] job screen.

You can perform the same operation using AccurioPro Print Manager.

2
Select a held print job, and then press [Job Management] followed by [Job Settings...].
3
Enable [Auto Inspection] from the [Quality] tab.
4
Proceed to the automatic inspection. Select the [Quality] tab, and configure the following items.

Item

Setting Value

[Inspection Level]

For example, select [Standard]

[Reference Image]

Select [Use Registered Image], press [Change...], and on the subsequently displayed screen select the reference image you want to use from the registered reference images

5
Press [Print].

The print job begins, followed by the automatic inspection.

If an abnormality is detected during the inspection, it is displayed on the [MACHINE] and [IQ Detected Result] screens on the system’s Touch panel. For details, refer to [IQ Detected Result].

You can check the automatic inspection reports using the system’s Touch panel or from Web Utilities on Auto Inspection Unit UK-301.

Reference

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.