[Package Color Auto Adj.]
Overview
Collectively adjust items related to image stability. The type of adjustment to be performed can be set freely.
NOTICE
- Intelligent Quality Optimizer IQ-501 is required to use this function.
Video of Procedure
Procedure
1
Press [Package Color Auto Adj.].
For details about the procedure, refer to [Package Color Auto Adj.].
2
Before performing the adjustment, press [Initial Set.] as necessary to enable the adjustment settings to be changed.
3
Change any of the setting contents ([Screen of Adjustment Target], [Additional Adjustment], [Maximum Density Adjustment Tray], [Adjustment Tray]).
If you have set [Auto Run] to ON, [Package Color Auto Adj.] is performed automatically when the machine is powered ON.
4
Load the paper used when registering the target density into the tray, and select that tray.
5
You can also change the [Paper Setting] and [Output Setting].
6
Press [Start].
7
Check the contents of the adjustment results displayed after the adjustment has been completed.
in the upper-right of a page, it turns into 
and is registered as a bookmark.