User's Guide

> Adjustment / Maintenance > Image Position Adjustment > Finishing Adjustments > Making Micro-Adjustments to Side Guides on Paper Feed Trays (With PF-712/PF-713/PF-812)

Making Micro-Adjustments to Side Guides on Paper Feed Trays (With PF-712/PF-713/PF-812)

Overview
Procedure

Overview

If the spacing between the top and bottom sections of the front and back Side guides is inconsistent, the paper may not be able to be fed properly. If this is the case, adjust the Side guides so that the spacing between the top and bottom sections is uniform.

Procedure

For details about the procedure when Paper Feeder Unit PF-712 or Paper Feeder Unit PF-713 are mounted, refer to Fine-Adjusting the Side guides Interval of Paper Feeder Unit PF-712/Paper Feeder Unit PF-713.

For details about the procedure when Paper Feeder Unit PF-812 is mounted, refer to Fine-Adjusting the Side guides Interval of Paper Feeder Unit PF-812.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.