Daily Adjustment Flow (High Precision)
Overview
Perform this if you cannot obtain the required image quality even after performing the daily adjustment flow (standard), or in circumstances such as the following.
- Just before outputting jobs for which color is important
- When color stability is not sufficient (when you want to improve the accuracy of reproducibility)
- When the paper type is different
Tips
- The use of [Package Color Auto Adj.] allows automatic flow adjustment. Intelligent Quality Optimizer IQ-501 is required to use this function. For details, refer to What Is Package Color Adjustment?.
- It is recommended that you perform [Color Balance Adjustment] once every 2 to 3 months. For details, refer to Adjustment Flow for When Using New Types of Paper.
Using RU Option (Relay Unit RU-518m), but No Intelligent Quality Optimizer IQ-501 Mounted
Follow the steps below.
Step 1
Check that [Periodical Adj. Execution] in [Basic Setting] has been set to [ON].
For the trays also, check that either [Default Adj. Data] or [Registered Adj. Data] are selected for [Each Paper Type Color Adj.Data] in [Paper Setting]. Select [Default Adj. Data] if using general paper.
[Each Paper Type Color Adj.] is recommended when using special paper or if you want to improve the accuracy of automatic adjustments.
Step 2
Automatically adjust the color reproducibility of all of the output paper.
When Mounted With Intelligent Quality Optimizer IQ-501
Follow the steps below.
Step 1
Perform by selecting [Auto Selection] for [Initial Set.]. Perform while the system is powered on.
Tips
When [Auto Selection] cannot be selected for [Initial Set.] in [Package Color Auto Adj.], follow the steps detailed on Using RU Option (Relay Unit RU-518m), but No Intelligent Quality Optimizer IQ-501 Mounted of Daily Adjustment Flow (High Accuracy).
in the upper-right of a page, it turns into 
and is registered as a bookmark.