User's Guide

> Adjustment / Maintenance > Image Quality Adjustment > Details of Implementing Image Quality Adjustment Items > Output Paper Manual Density Adjustment

Output Paper Manual Density Adjustment

Overview
Procedure

Overview

Manually adjust output paper density.

Procedure

1

Press [Color Density Manual Control].

For details about the procedure, refer to Screen.

2

Press [Print Mode].

3

Press [Quality Adj.], and then press [Screen Pattern]. Select the screen you want to adjust, and return to the [PRINT MODE] screen.

4

Select the paper you want to adjust, and press Start on the Control panel.

The chart is output. Complete the manual adjustment.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.