Configure the setting to attach a line (corner crop mark) for trimming to the finishing size to image data of a hold job when printing. This function allows you to select the print type (shape) of a corner crop mark or adjust the print position.
The selected corner crop mark is displayed on the preview screen.
Category | Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [Type1] | Prints a crop mark in the finishing trimming line of image data and the outer margin. | |
[Type2] | Prints a crop mark in the finishing trimming line of image data and outside the outer margin. | ||
[Type3] | Prints a crop mark in the finishing trimming line of image data. | ||
[OFF] | Does not print the corner crop mark. | ||
[Trim Margin] | Sets the trimming margin. This margin can be set by selecting the print type of a corner crop mark. Range: 0.1 mm to 20 mm Default: 3 mm | ||
[Offset] | Sets the leftward and rightward offset amounts. This value can be set by selecting the print type of a corner crop mark. Range: -20.0 mm to 20.0 mm Default: 0.0 mm | ||
[Offset] | Sets the upward and downward offset amounts. This value can be set by selecting the print type of a corner crop mark. Range: -20.0 mm to 20.0 mm Default: 0.0 mm | ||
Keypad | Enter the trimming amount or offset amount. | ||
[,] / [+] | Increases or decreases the numeric value in increments of 0.1 mm. | ||
[+ / -] | Sets the plus or minus of the numeric value. | ||
[Back Side Printing OFF] | Does not print the corner crop mark on the back side for 2-sided printing. | ||
[Page Margin Synchronize OFF] | Does not synchronize the corner crop mark with the specified binding margin. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [JOB LIST] - [Hold Job] - [Job Ticket] - [Job Ticket Edit] - [Register Crop Mark] | ||
Touch panel - [JOB LIST] - [Hold Job] - [Page Edit] - [Job Ticket Edit] - [Register Crop Mark] |