Daily Adjustment Flow (High Precision)
Overview
Perform this if you cannot obtain the required image quality even after performing the daily adjustment flow (standard), or in circumstances such as the following.
Just before outputting jobs for which density is important
When density stability is not sufficient (when you want to improve the accuracy of reproducibility)
When the paper type is different
Tips
- The use of [Package Color Auto Adj.] allows automatic flow adjustment. The optional Intelligent Quality Optimizer IQ-501 is required to use this function. For details, refer to What Is [Package Color Auto Adj.]?.
Using RU Option (Relay Unit RU-518m), but No Intelligent Quality Optimizer IQ-501 Mounted
Step 1
[Periodical Adj. Execution] settings
Set [Periodical Adj. Execution] ([Basic Setting]) in [Basic Setting] to [ON].
Step 2
[Color Density] settings
For the trays also, select either [Default Adj. Data] or [Registered Adj. Data] at [Color Density] in [Paper Setting]. Select [Default Adj. Data] if using general paper.
[Each Paper Type Color Adj.] is recommended when using special paper or if you want to improve the accuracy of automatic adjustments.
Step 4
Automatically adjust the reproducibility of density across the entire output paper.
When Mounted With Intelligent Quality Optimizer IQ-501
Step 1
Perform by selecting [Additional Adjustment] in [Initial Set.]. Perform while the system is powered on.
in the upper-right of a page, it turns into 
and is registered as a bookmark.