User's Guide

Home > Adjustment / Maintenance > Image Position Adjustment > Maintenance > Adjustment Flow for When Using New Types of Paper

Adjustment Flow for When Using New Types of Paper

Overview
When Mounted With Intelligent Quality Optimizer IQ-501
When the Intelligent Quality Optimizer IQ-501 Is Not Mounted and the Scanner (Original Glass) Is Mounted
Without a Scanner (Original Glass)

Overview

If you want to use a new type of paper, follow the procedure below to adjust the image position.

When Mounted With Intelligent Quality Optimizer IQ-501

Step 1
Load paper into the tray (Loading Paper)
Load the paper you want to use for the adjustments into the tray. Adjust the Side guides on the Paper tray if you are using a paper feeder unit to improve printing stability.
Step 2
[AutoMeasure]
Automatically performs [Both Sides].
Step 3
Paper profile registration ([Register])
Register the [Paper Profile].

When the Intelligent Quality Optimizer IQ-501 Is Not Mounted and the Scanner (Original Glass) Is Mounted

Step 1
Load paper into the tray (Loading Paper)
Load the paper you want to use for the adjustments into the tray. Adjust the Side guides on the Paper tray if you are using a paper feeder unit to improve printing stability.
Step 2
[Scan Meas.]
Perform [Both Sides].
Step 3
Paper profile registration ([Register])
Register the [Paper Profile].
Tips
  • [Front] adjustment is necessary in between Step 1 and Step 2 depending on the firmware version being used. For details, contact your service representative.

Without a Scanner (Original Glass)

Step 1
Load paper into the tray (Loading Paper)
Load the paper you want to use for the adjustments into the tray. Adjust the Side guides on the Paper tray if you are using a paper feeder unit to improve printing stability.
Step 2
[AutoMeasure]
Automatically performs [Both Sides].
Step 3
[Chart Adjustment] ([Front]/[Back]) (when prioritizing the accuracy of the image positioning) or [Gap] (when making simple adjustments by reducing the number of measurement points)
Adjust the back side. When prioritizing the accuracy of the image positioning, perform [Rotate/Skew] adjustment. When making simple adjustments by reducing the number of measurement points, perform [Gap] adjustment (backside adjustment).
Step 4
Paper profile registration ([Register])
Register the [Paper Profile].

Was this information useful?