Adjustment Flow for Changing Screens
Overview
Perform the following image quality adjustments after changing the screen.
Tips
- This adjustment is the same as when performing adjustments during the setup of the system.
- The use of [Package Color Auto Adj.] allows automatic flow adjustment. The optional Intelligent Quality Optimizer IQ-501 is required to use this function. For details, refer to Automatic Batch Color Adjustment ([Package Color Auto Adj.]).
Adjustment Workflow
Step 1
[Periodical Adj. Execution] settings
Set [Periodical Adj. Execution] ([Basic Setting]) in [Basic Setting] to [ON].
Step 2
[Color Density] settings
For the trays also, select either [Default Adj. Data] or [Registered Adj. Data] at [Color Density] in [Paper Setting]. Select [Default Adj. Data] if using general paper.
[Each Paper Type Color Adj.] is recommended when using special paper or if you want to improve the accuracy of automatic adjustments.
Step 3
Screen Selection
Set the screen assignment ([Custom Screen]) from the machine, and select the screen method ([Screening]) from the printer driver.
Step 4
Automatically adjust the reproducibility of density across the entire output paper.
Step 5
[Density Balance Auto. Adj.]
Perform [Density Balance Auto. Adjustment] (When Mounted With Intelligent Quality Optimizer IQ-501), followed by automatic density balance adjustment.
in the upper-right of a page, it turns into 
and is registered as a bookmark.