[Initial Set.]
Overview
Initializes [Package Color Auto Adj.].
You can set any adjustment item or adjustment screen.
Setting Procedure
1
Select the appropriate screen from [Screen of Adjustment Target].
The screen that is able to be selected is [Screen1], [Screen2], or [Stochastic].
The type for each screen can be changed with [Custom Screen]. For details about the [Custom Screen], refer to [Custom Screen].
2
In [Additional Adjustment], select the adjustment items for [Package Color Auto Adj.].
3
In [Maximum Density Adjustment Tray], select the paper tray used for [Max Density Adj.].
In the paper tray set to [Maximum Density Adjustment Tray], load the paper used to register the target density. If different paper is used, it will not be possible to make the correct adjustment.
4
In [Adjustment Tray], select the paper tray used for various adjustments.
In this step, select the paper tray used for adjustment items other than [Max Density Adj.].
5
In [Auto Run], configure the setting to automatically perform [Package Color Auto Adj.] when the system is turned on.
[ON]: Automatically performs ON once a day when the system is turned on.
[OFF]: Does not automatically perform [Package Color Auto Adj.].
6
In [Overwrite Tray Set. of Max.DensityAdj.], select whether to overwrite the setting of the target paper tray with the target value setting of the maximum density when adjusting the maximum density.
NOTICE
- If the paper tray setting does not match the target value setting of the maximum density, the maximum density adjustment is not performed.
in the upper-right of a page, it turns into 
and is registered as a bookmark.