Set the finishing size for Card Cutting, the cut positions at the lead edge and upper edge, and the cut width. The numeric values at the rear edge and lower edge are calculated automatically.
a: [Finished Size(Height)]
b: [Finished Size(Width)]
c: [Lead Edge]
d: [Upper Edge]
e: [Cut Width(crosswise)]
f: [Cut Width(lengthwise)]
Category | Device Management, Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | Web Connection, Web Utilities | ||
Required options | All the following optional devices are required. Trimmer Unit TU-510 Job Separator JS-507 | ||
Required items | - | ||
Setting items | [Finished Size(Height)] | Sets the height and width of the finishing size. Set the value in the range of 85 mm to 92 mm / 3.346" to 3.622". Unit: 0.1 mm / 0.004" | |
[Finished Size(Width)] | Sets the width of the finishing size. Set the value in the range of 50 mm to 56 mm / 1.969" to 2.205". Unit: 0.1 mm / 0.004" | ||
[Lead Edge] | Sets the cut position at the lead edge using the value from the lead edge of paper. Set the value in the range of 10 mm to 13 mm / 0.394" to 0.512", and also set the cutting amount at the rear edge in the range of 10 mm to 13 mm / 0.394" to 0.512". Unit: 0.1 mm / 0.004" | ||
[Rear Edge] | The rear edge position is automatically calculated from the paper size (widthwise), finishing size (width), lead edge position, and gutter slit width (vertical direction). Rear edge position = Paper size (widthwise) - Finishing size (width) - Lead edge position - Gutter slit width (vertical direction) | ||
[Upper Edge] | Sets the cut position at the upper edge using the value from the upper edge of paper. Set the value in the range of 8.0 mm to 26.0 mm / 0.315" to 1.024", and also set the difference between the upper and lower edge positions in the range of 10 mm / 0.394". Unit: 0.1 mm / 0.004" | ||
[Lower Edge] | The lower edge position is automatically calculated from the paper size (lengthwise), finishing size (height), upper edge position, and gutter slit width (horizontal direction). Lower edge position = Paper size (lengthwise) - Finishing size (height and width) - Upper side position - Gutter slit width (horizontal direction) | ||
[Cut Width(crosswise)] | Sets the cut width of the horizontal direction. Fixed to 8.0 mm / 0.315". | ||
[Cut Width(lengthwise)] | Sets the cut width of the vertical direction. Set the value in the range of 0 mm / 0" or 5.0 mm to 13 mm / 0.197" to 0.512". Unit: 0.1 mm / 0.004" | ||
[Complete] | Creates a trimmer profile with the specified value. | ||
[Cancel] | Cancels the specified value, and returns to the previous screen. | ||
Remarks | Sheets cut to the card size are output to the Card tray. | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Trimmer Profile] - [Create] - Select [Card Cutting]. - [OK] | ||
Touch panel - [MACHINE] - [Trimmer Profile] - Select a trimmer profile for Card Cutting. - [Edit] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [Card Cutting]. - [OK] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile for Card Cutting. - [Edit] | |||
Web Utilities - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [Card Cutting]. - [OK] | |||
Web Utilities - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile for Card Cutting. - [Edit] |