Set the finishing size for Four Edge Trim as well as the cut positions at the lead edge and upper edge. The numeric values at the rear edge and lower edge are calculated automatically.
When attaching perforation, also set perforation positions.
a: [Finished Size(Height)]
b: [Finished Size(Width)]
c: [Lead Edge]
d: [Upper Edge]
e: Horizontal perforation position
f: Vertical perforation position
Category | Device Management, Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | Web Connection, Web Utilities | ||
Required options | Trimmer Unit TU-510 | ||
Required items | - | ||
Setting items | [Finished Size(Height)] | Sets the height and width of the finishing size. Set the value so that the width of the cut paper is 120 mm / 4.724" or more. Unit: 0.1 mm / 0.004" | |
[Finished Size(Width)] | Sets the width of the finishing size. Set the value so that the length of the cut paper is 133 mm / 5.236" or more. Unit: 0.1 mm / 0.004" | ||
[Lead Edge] | Sets the cut position at the lead edge using the value from the lead edge of paper. Set the value in the range of 0 mm / 0" or 10 mm to 100 mm / 0.394" to 3.937", and also set the cutting amount at the rear edge in the range of 0 mm / 0" or 10 mm to 13 mm / 0.394" to 0.512". Unit: 0.1 mm / 0.004" | ||
[Rear Edge] | The rear edge position is automatically calculated from the paper size (widthwise), finishing size (width), and lead edge position. Rear edge position = Paper size (widthwise) - Finishing size (width) - Lead edge position | ||
[Upper Edge] | Sets the cut position at the upper edge using the value from the upper edge of paper. Set the value in the range of 0 mm / 0" or 8.0 mm to 26.0 mm / 0.315" to 1.024", and also set the difference between the upper and lower edge positions in the range of 10 mm / 0.394". Unit: 0.1 mm / 0.004" | ||
[Lower Edge] | The lower edge position is automatically calculated from the paper size (lengthwise), finishing size (height and width), and upper edge position. Lower edge position = Paper size (lengthwise) - Finishing size (height and width) - Upper side position | ||
Horizontal perforation position | You can set up to 2 horizontal perforation positions in the back and front sides. Leave a space of 30 mm / 1.181" or more from the rear or lead edge, and set so that the perforation position interval between the back and front sides is 120 mm / 4.724" or more. Unit: 0.1 mm / 0.004" | ||
Perforation length (Horizontal direction) | Sets the perforation length of the horizontal direction. Sets the same value for the back and front sides. Set the value to 30 mm / 1.181" or more. Unit: 0.1 mm / 0.004" | ||
Vertical perforation position | Sets the vertical perforation position. Up to 10 perforation positions can be set. Leave a space of 30 mm / 1.181" or more from the lead or rear edge, and set the perforation position interval to 30 mm / 1.181" or more. Unit: 0.1 mm / 0.004" | ||
Perforation length (Vertical direction) | Sets the perforation length of the vertical direction. Set the value to 30 mm / 1.181" or more. Unit: 0.1 mm / 0.004" | ||
[Disabled] | Clear this check box to set a perforation position. | ||
[Complete] | Creates a trimmer profile with the specified value. | ||
[Cancel] | Cancels the setting, and returns to the previous screen. | ||
Remarks | The optional Perforation Unit PE-101 and Perforation Unit PE-102 are required to attach perforations. | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Trimmer Profile] - [Create] - Select [Four Edge Trim]. - Select [Perforation]. - [OK] | ||
Touch panel - [MACHINE] - [Trimmer Profile] - Select a trimmer profile of [Four Edge Trim / Perforation]. - [Edit] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [Four Edge Trim]. - Select [Perforation]. - [OK] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile of [Four Edge Trim / Perforation]. - [Edit] | |||
Web Utilities - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [Four Edge Trim]. - Select [Perforation]. - [OK] | |||
Web Utilities - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile of [Four Edge Trim / Perforation]. - [Edit] |