Configure the setting to slit both edges of the paper. The slitting amount can also be set.
Category | Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel, Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | Saddle Stitcher SD-513 with Trimmer Unit TU-503 mounted | ||
Required items | - | ||
Setting items | [(1)] | Sets the slitting amount at the top of the paper. Range: 8.0 mm to 26.0 mm When the slitting amount is different from [(2)] by 10.0 mm or more, its value cannot be entered. | |
[(2)] | Sets the slitting amount at the bottom of the paper. Range: 8.0 mm to 26.0 mm When the slitting amount is different from [(1)] by 10.0 mm or more, its value cannot be entered. | ||
[Offset against Cover] | Sets the slitting amount of the body for the cover. Range: -1.0 mm to +1.0 mm This item is available when [With Cover] is set in the [Booklet] function of [Application]. | ||
Keypad | Enter the slitting amount. | ||
[+] / [,] | Increases or decreases the numeric value in increments of 0.1 mm. | ||
[Function OFF] | Turns the function off while maintaining the set information. | ||
[Cancel] | Moves to the previous screen without saving the settings. | ||
[OK] | Saves the settings and moves to the previous screen. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [COPY] - [Output Setting] - [2-Side Slit] | ||
Control panel - Utility/Counter - [User Setting] - [Initial Setting] - [Copy Initial Setting] - [Output Setting] - [2-Side Slit] |