Set the IP filtering for TCP/IP.
Category | Network / Security | |||
Location | Machine | - | ||
Printer driver | - | |||
Application | Web Connection | |||
Required options | - | |||
Required items | - | |||
Setting items | [Permit Access] | [Enable] | Enables [Permit Access]. | |
[Disable] | Disables [Permit Access]. | |||
[Set1] | Enter the IP address range to allow a connection with the Image Controller. This setting is available when [Enable] is selected in [Permit Access]. | |||
[Set2] | ||||
[Set3] | ||||
[Set4] | ||||
[Set5] | ||||
[Deny Access] | [Enable] | Enables [Deny Access]. | ||
[Disable] | Disables [Deny Access]. | |||
[Set1] | Enter the range of IP addresses that reject a connection with the Image Controller. This setting is available when [Enable] is selected in [Deny Access]. | |||
[Set2] | ||||
[Set3] | ||||
[Set4] | ||||
[Set5] | ||||
[OK] | Applies the setting. | |||
[Cancel] | Cancels the setting. | |||
Remarks | - | |||
Reference | - | |||
Screen access | Web Connection - [Network] - [TCP/IP Setting] - [IP Filtering] |