[Finished Size(Height)]

Sets the height and width of the finishing size.

Set the value so that the width of the cut paper is 120 mm / 4.72" or more.

Unit: 0.1 mm / 0.004"

[Finished Size(Width)]

Sets the width of the finishing size.

Set the value so that the length of the cut paper is 133 mm / 5.24" or more.

Unit: 0.1 mm / 0.004"

[Leading Edge]

Sets the cut position at the leading edge using the value from the lead edge of paper.

WY1: Set the value in the range of 0 mm / 0" or 10 mm to 100 mm / 0.39" to 3.94", and also set the cutting amount at the trailing edge in the range of 0 mm / 0" or 10 mm to 13 mm / 0.39" to 0.51".

WY2: Set the value in the range of 0 mm / 0" or 8.0 mm to 100 mm / 0.31" to 3.94", and also set the cutting amount at the trailing edge in the range of 0 mm / 0" or 8.0 mm to 16 mm / 0.31" to 0.63".

Unit: 0.1 mm / 0.004"

[Trailing Edge]

The trailing edge position is automatically calculated from the paper size (widthwise), finishing size (width), and leading edge position.

Trailing edge position = Paper size (widthwise) - Finishing size (width) - Leading edge position

[Rear Edge]

Sets the cut position at the rear edge using the value from the upper edge of paper.

Set the value in the range of 0 mm / 0" or 8.0 mm to 26 mm / 0.31" to 1.02", and also set the difference between the rear and front edge positions in the range of 10 mm / 0.39".

Unit: 0.1 mm / 0.004"

[Front Edge]

The front edge position is automatically calculated from the paper size (lengthwise), finishing size (height and width), and rear edge position.

Front edge position = Paper size (lengthwise) - Finishing size (height and width) - Rear edge position

FD perforation position

You can set up to 2 horizontal perforation positions in the rear and front sides.

WY1: Set the perforation so that it is at least 30 mm / 1.18" from the rear or front edge, and the distance between the perforation positions in the rear and front sides is 120 mm / 4.72" or more.

WY2: Leave a space of 10 mm / 0.39" or more from the rear or front edge, and set so that the perforation position interval between the rear and front sides is 120 mm / 4.72" or more.

Unit: 0.1 mm / 0.004"

Perforation length (Horizontal direction)

Sets the perforation length of the horizontal direction. Sets the same value for the rear and front sides.

Set the value to 30 mm / 1.18" or more.

Unit: 0.1 mm / 0.004"

CD perforation position

Sets the vertical perforation position. You can set up to 5 perforation positions in each of the back and front sides.

WY1: Leave a space of 30 mm / 1.18" or more from the leading or trailing edge, and set the perforation position interval to 30 mm / 1.18" or more.

WY2: Leave a space of 5.0 mm / 0.20" or more from the leading or trailing edge, and set the perforation position interval to 9.0 mm / 0.35" or more.

Unit: 0.1 mm / 0.004"

Perforation length (Vertical direction)

Sets the perforation length of the vertical direction in the rear and front sides respectively.

Set the value to 30 mm / 1.18" or more.

Unit: 0.1 mm / 0.004"

[Disabled]

Clear this check box to set a perforation position.

[Complete]

Creates a trimmer profile with the specified value.

[Cancel]

Cancels the setting, and returns to the previous screen.

[PDF Download]

You can download the trimming image with the dimensions displayed on the profile creation screen as a PDF file. This is displayed when accessed from Web Connection or Web Utilities.