By mounting optional devices, this system can perform processing such as Four Edge Trim for trimming, Multiple Cutting for cutting to 2 sheets, and Card Cutting for cutting to the card size. A trimmer profile is a function that pre-registers the advanced settings of the above processing, and recalls and uses the desired one as necessary.
The Trimmer Unit TU-510 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
Set the detail of the cut type, cutting amount, and cut position to suit the cutting shape.
The following cut types are available.
In the descriptive illustrations, solid lines represent trims and dotted lines represent creases or perforations.
Cut type | Description | Available paper size | |
---|---|---|---|
[Four Edge Trim] | ![]() | Cuts four sides of paper. Creases or perforations can be set. | 140.0 mm e 153.0 mm to 330.2 mm e 1,300.0 mm / 5.51" e 6.02" to 13" e 51.18" |
[Multiple Cutting] | ![]() | Cuts paper to 2 sheets. | 140.0 mm e 266.0 mm to 330.2 mm e 487.7 mm / 5.51" e 10.47" to 13" e 19.20" |
[Card Cutting] | ![]() | Cuts paper to the card size. | WY1: 287.0 mm e 370.0 mm to 330.2 mm e 457.2 mm / 11.3" e 14.57" to 13" e 18" WY2: 210.0 mm e 279.4 mm to 330.2 mm e 470.0 mm / 8.27" e 11.0" to 13" e 18.50" |
[1x1-3x3 Cutting(CR)] | ![]() | Set the layouts from 1 e 1 to 3 e 3 to trim the paper. You can also set the crease position. | 200.0 mm e 143.0 mm to 330.2 mm e 487.7 mm / 7.87" e 5.63" to 13" e 19.20" |
[1x1-1x3 Cutting(PE)] | ![]() | Set the layouts from 1 e 1 to 1 e 3 to trim the paper. You can also set the perforation position. | 210.0 mm e 143.0 mm to 330.2 mm e 487.7 mm / 8.27" e 5.63" to 13" e 19.20" |