Name

AccurioPress 7136P

Type

Console type

Color compatibility

Monochrome (direct transfer)

Print method

LED exposure electrostatic copying method

Photoconductor

OPC

Development method

Dry 2-component, Magnetic brush development

Transfer type

Belt transfer

Fusing method

Heat roller transfer

Gradation/Expression color

Equivalent to 256 gradations (binary during printer image output)

Paper weight (Main body tray)

Plain, Fine, Coated, Blank Insert, Tab paper ^*: 40 g/m² to 300 g/m² / 10 lb Bond to 81 lb Bond

Book/News, Plain-rough: 40 g/m² to 216 g/m² / 10 lb Bond to 57 lb Bond

Textured: 75 g/m² to 216 g/m² / 20 lb Bond to 57 lb Bond

*: Setting direction specified (Set the tab side to the rear edge.), Single side only.

Paper size (Main body tray)

Standard: SRA3 w, A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w, 8 e 13 w, 8K w, 16K w/v

Custom: Widthwise 182 mm to 324 mm, lengthwise 139 mm to 463 mm / Widthwise 7.17" to 12.76", lengthwise 5.47" to 18.23"

Tab paper: A4T w/v, 8.5 e 11T w/v

Series B paper is set to JIS or ISO standard size by default. This setting differs depending on the shipping region. For JIS/ISO switching, contact your service representative.

Detectable fixed sizes can be changed. Furthermore, use of K size can be selected on the [Utility] screen, and K size can be detected. For details, refer to [K Size].

Feed capacity (Main body tray)

Tray 1 (upper tray) / Tray 2 (lower tray): 1,600 sheets for each (64 g/m² / 18 lb Bond), 1,500 sheets for each (80 g/m² / 21 lb Bond)

Feedable paper sizes for the machine

Straight output/Duplex

Standard: SRA3 w, A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, Postcard w^*, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 8 e 13 w, 8K w, 16K w/v

Custom:

Widthwise 95 mm to 324 mm, lengthwise 133 mm to 483 mm / Widthwise 3.74" to 12.76", lengthwise 5.24" to 19.02"

Tab paper (single side only): A4T w/v, 8.5 e 11T w/v

*: Only in Japan.

Allowed weight for machine feed

40 g/m² to 350 g/m²* / 10 lb Bond to 93 lb Bond

* It is recommended that the grain direction is parallel to the feeding direction for paper of up to 49 g/m² / 13 lb Bond.

* It is recommended that the grain direction is orthogonal to the feeding direction for paper of up to 217 g/m² / 58 lb Bond.

Warm-up time

7 minutes or less (23 °C, 50%RH, rated voltage when electric current is running through)

Power

• In Japan: Single-phase AC 200 V / 20 A, 50/60 Hz

• Metric area: AC 220 V to 240 V / 20 A, 50/60 Hz

• Inch area: AC 208 V to 240 V / 20 A, 60 Hz

Maximum power consumption

• In Japan: 4,000 W or less

• Metric area: 4,800 W or less

• Inch Area: 4,800 W or less

* In the following system configuration.

Paper Feeder Unit PF-709 + Machine + Relay Unit RU-510 + Finisher FS-532

Weight

345 kg / 760.60 lb

Dimensions

990 mm (W) e 910 mm (D)^* e 1,020 mm (H) / 38.98" (W) e 35.83" (D)^* e 40.16"(H) (Machine)

*: Including rear duct (130 mm / 5.12").

Machine occupied dimensions

4,180 mm (W) ^*1 e 2,060 mm (D)^*2 / 164.57" (W)^*1 e 81.10" (D)^*2

(Machine + Paper Feeder Unit PF-710 + Relay Unit RU-518m + Intelligent Quality Optimizer IQ-501 + Finisher FS-541)

*1: Secure a space of 100 mm / 3.94" from both sides of the machine.

*2: Secure a space of 950 mm / 37.40" in front of the machine, and a space of 200 mm / 7.87" from the rear duct in the rear side.

Usage environment

10 °C to 30 °C

10%RH to 80%RH

Image controller function

Built-in image controller

Write resolution

Main scanning: 1,200 dpi

Sub scanning: 1,200 dpi

Memory capacity

Memory: 16 GB

HDD: 1 TB e 2

SSD: 4 GB

Internal font (PS)

• European languages: 136 typefaces

Internal font (PCL)

• European languages: 80 typefaces (AGFA Contract), 1 typeface (Line Printer)

Page description language

• PCL5E / XL (PCL6)

• Adobe PostScript3 (PS3020)

• PDF Direct printing (PDF Ver. 2.0)

• TIFF Direct printing (TIFF Ver. 6 standard)

• PPML (Ver.2.2)

• APPE (Ver.5.6)*

*: Only supported when Upgrade Kit UK-217 is mounted.