Web Connection
Q. What Should I Do to Log In to Web Connection?
A. Enter the IP address in the URL field of the browser, and press [Enter].
For details about how to access Web Connection, refer to the following:
Reference
- For details about how to confirm the IP address, refer to [TCP/IP Settings].
Q. When Will I Lose Access to Web Connection?
A. If the following setting is configured, Web Connection is not available. To use it, contact this system's administrator.
Enhanced security mode is enabled.
[Web Connection Setting] is set to [OFF] in [Network Setting].
[Web Connection Setting] is set to [Disable] in [Quick Security Setting].
The browser installed in the Touch panel is used.
Tips
Even if [Quick IP Filtering] is set, you may not be able to access Web Connection.
- Setting [Quick IP Filtering] to [No Filtering] may allow you access. Check for security issues before changing settings.
- For details about the [Quick IP Filtering] setting, refer to [Quick IP Filtering].
Q. What Is the Password of the Web Connection Administrator Mode?
A. For details about the default administrator password, refer to [About the Administrator Password].
If you cannot log in using the default password, contact this system's administrator.
in the upper-right of a page, it turns into 
and is registered as a bookmark.