Adjustment

A. Max. 20 sheets.

For details, refer to [Scan Meas.].

A. Output the background sheet for measurement with a paper size of A3 or 11 e 17.

A. Store the data measured with AccurioPro ColorManager on a USB device (USB flash drive, etc.) or on a computer on the same network as this system, and then register it on this system.

A. The colorimetry is affected, so pay attention to the colors of a thing under the chart.

For details about how to use the colorimeter, refer to its user's guide.

Tips

• The colorimetry is also affected by the color of a desk to put a chart on.
• For measurement, put a chart on white paper or a white board.
• For board, use the measurement board supplied with the colorimeter.
• For paper, pile 10 sheets or more of the same paper type as a chart.

A. Create a "\PRESS_7136\ADJUST_DATA" folder just under USB flash drive, and save adjustment data in the folder.

A. Automatic inspection is a function that compares the registered reference image with the target image, and detects problematic output paper. A reference image for automatic inspection must be pre-registered.

A. Set an area that is not subject to automatic inspection, or an area subject to special inspection. Efficient inspection is enabled by preventing unnecessary errors and automating checks such as serial number printing.

Reference

• For details about the automatic inspection area, refer to What Is [InspectionAreaSet.]?.

A. Yes, you can.

For details, refer to [AutoInspect.Report].