Web Utilities | [Volume Track data add]

[Volume Track data add]

Registers new account track data.

Up to 1,000 account track data can be registered.

NOTICE

The following settings are required to use this function.

NOTICE

The authentication operation is always required to display the [Machine Manager Setting] screen. Pressing [Machine Manager Setting] displays the password entry screen. Enter "admin" in User Name, and the administrator password in Password.
However, you are not able to set it if this system is active.

Reference

The registered account track data can be changed. For details, refer to [Volume Track data list].
For details about user authentication setting of this system, refer to [User Authentication].
For details about the account track setting of this system, refer to [Account Track].

Set the account name to [*Account Name] and the password to [Password].

It is not possible to register the account name or password duplicated with existing data.
Enter the account name, password, and setting values using single-byte alphanumeric characters. Up to 8 single-byte alphanumeric characters can be entered.
If [Account Track Input Method] of this system is set to [Account Name & Password], be sure to register the account name.
If [Account Track Input Method] of this system is set to [Password Only], be sure to register the password.

Set the maximum number of prints in [Max. Allowance Set].

Range: 1 to 99999999
If you select the [No Limit] check box, the entered number returns to "0", which does not set the upper limit.

Set the permission to use in [Useable Function].

Set whether to allow use of the [Copy], [Scan], [Print], or [User Box] operation.
For details, refer to [Function Permission] in [Edit].

Click [Registration].

The [Registered as follows] is displayed, and the new data is registered in this system.

If the setting is incorrect, an error message is displayed. Confirm the contents, and retry processing.