Network
Q. Where Can I Check the IP Address of This Machine?
A. You can check the IP address in [Administrator Setting] or [Network/Scan Set.] on the Control panel.
For details about how to check the IP address in [Administrator Setting], refer to [TCP/IP Settings].
For details about how to check the IP address in [Network/Scan Set.], refer to [Report Type].
Q. Where Can I Check the IP Address of the Image Controller?
A. You can check the IP address in [TCP/IP Setting] of [Controller]. For details, refer to [TCP/IP Setting].
Q. Can I Set the Network of This System Using Web Connection?
A. Yes, you can. For details, refer to [Network].
Q. What Should I Do to Connect This System to Macintosh Using Bonjour?
A. Check whether TCP/IP is set to this system.
The Bonjour protocol runs on TCP/IP, so you need to pre-set TCP/IP on this system. For details, refer to [TCP/IP Settings].
Q. I Cannot Access Web Connection.
A. Set [Quick IP Filtering] to the settings below. Unless it is set, you cannot access this system from a location where the network segment differs from this system's installation location.
For machine: [No Filtering]
For Image Controller: [No Filtering]
Reference
- For details about [Quick IP Filtering] settings for the machine, refer to [Quick IP Filtering].
- For details about [Quick IP Filtering] settings for the Image Controller, refer to [Simple IP Filtering].
in the upper-right of a page, it turns into 
and is registered as a bookmark.