Gamma Automatic Adjustment

Performing Gamma Automatic Adj.

This automatically adjusts the density reproducibility of the whole paper to be output.

Density adjustment flow and the position of this adjustment

  • In the pre-output density adjustment flow, this adjustment is positioned shown below.

  • Perform the previous adjustment before proceeding with this adjustment.

  • When Intelligent Quality Optimizer IQ-501 is mounted on the machine, this adjustment is positioned in the same way as the above.

Reference

  • To not continuously perform the series of adjustment of the density adjustment flow, perform the gamma automatic adjustment, and then resume from the next adjustment.

Density Adjustment Flow

Position of this adjustment

Previous adjustment

This adjustment

Next adjustment

Adjustment flow when changing the screen

Screen selection

This adjustment

Density Balance Adjustment

Regular adjustment flow: Normal

- (None)

Regular adjustment flow: High Precision

- (None)

This adjustment

Maximum Density Adjustment

  1. On the touch panel of the main body, press Adjustment on the MACHINE screen.

    The Adjustment Menu is displayed.

  2. Press Gamma Automatic Adjustment on the Adjustment Menu.

  3. Press Start. After adjustment was completed, press Return.

    When the message in the upper left of the screen changes from Now adjusting to Completed, adjustment is completed.

  4. Press Exit [ADJUSTMENT].